| Free Water Testing
|
Phone: (831) 438-6400
Fax: (831) 438-4092 |
 |
Monday-Thurs: 9:30am - 6:30pm
Friday-Saturday: 9:30am - 6:00pm |
|
|
|
Reverse Osmosis is the best way to purify our water. The Reverse
Osmosis membrane is effective against heavy metals, Bacteria & Viruses,
MTBE’s, etc. our Hydrotrech R/O is a four stage filtration
system that delivers only the purest drinking water to you
The first filter is a spun sediment cartridge that removes suspended
particles like silt, dirt, rust, etc. The second filter is an activated
carbon filter (AC) that removes organic matter as well as dissolved
gasses. Most municipalities chlorinate their water to remove bacteria;
the carbon filter will remove any chlorine which has been found
to be carcinogenic. The third filter is the R/O membrane. This
is the filter that is responsible for the purification of your
water. The pores are so small (.5 microns) that water is made a
drop at a time and stored in a 2.5 gallon tank until you need it.
The last filter is identical to the 2nd (AC) and acts as a polishing
element before the water goes into your glass. The Hydrotech unit
can produce 15-25 gallons of water per day and has a ratio of 2:1
(for every 2 gallons of waste water 1 gallon of pure water is produced).
Also built in is an automatic shut-off so that when the storage
tank is full the unit shuts off and no water is made or sent to
the drain in order to minimize wasting water.
We also specialize in Commercial applications. We currently serve
two Hospitals (Willow Glen & Watsonville Residential). We
have systems in the Pebble Beach fire house and numerous homes
in that area and we also purify the water for Comcast Cable and
Surf Control, Inc., among many others! |
Hydrotech's 123 Series
|
Premier Push
Button |
Monitored System
|
The 4VTFC75G-PB, 4VTFC50G-PB,4VTFC25G-PB and 4VTFC9G-PB
Hydrotech® Reverse Osmosis Drinking Water Systems combine
mechanical filtration with reverse osmosis technology for
effective water treatment in point-of-use applications. These
models are equipped with the patented Smartap® Push Button
Monitor, which compares the feed water to the product water
to determine water quality performance. The Smartap® Push
Button Monitor is activated at the touch of a button. In
addition, these models includeStandard features such as Thin
FilmComposite membrane, sediment filter, pre-activated carbon
filter, post carbonfilter, automatic shutoff, chrome-platedair
gap faucet and a metal storage tank.
|
Features |
|
• Thin Film Composite
Membrane
• Sediment Filter
• Pre-activated Carbon Filter
• Post-Carbon Filter
• Automatic Shutoff
• Chrome-plated Air Gap Faucet
• Metal Storage Tank
• Built-in Test Monitor |
WGR 150, 300 and 450 Reverse Osmosis Systems
Features:
- Membranes: Thin Film Composite (TFC) for maximum rejection
of impurities
- Membrane Housings: WGR 150, 300 and 450 housings are stainless
steel
- Process Pump: Direct coupled rotary vane pump, designed for
continuous high pressure service
- Frame: Corrosion and scratch resistant powder coated steel
- Prefilters: 5 Micron Pre-Filter - for the removal of sediment
- Granular Activated Carbon Pre-Filter - for the removal of chlorine
- Inlet Isolation Valve: Provides a convenient shut-off for
easy pre-filter replacement
- Inlet Low Pressure Shutoff Switch: Automatic protection for
the process pump should insufficient feed water
- pressure be available
- Outlet Tank Full Shutoff Switch: System will automatically
start when tank pressure falls below 30 psi and stop
- when pressure reaches 50 psi
- Simple Maintenance / Inspection: WGR Series components are
strategically located on the frame for easy access
- and inspection
WGR 150, 300 and 450 Optional Features:
- Stainless Steel Process Pump - replaces standard brass process
pump
- Float Switch - mechanical tank full float switch for atmospheric
type storage tanks
- Low Energy Membranes - available on WGR 300 only
WGR 600, 1200 and 1800 Systems
Features:
- Membranes: Thin Film Composite (TFC) for maximum rejection
of impurities
- Membrane Housings: WGR 600, 1200 and 1800 housings are PVC
- Process Pump: Direct coupled rotary vane pump, designed for
continuous high pressure service
- Frame: Corrosion and scratch resistant powder coated steel
- Prefilters: 5 Micron Pre-Filter - for the removal of sediment
- Radial Flow Activated Carbon Pre-Filter - for the removal of
chlorine
- Flow Meters: Product, Reject and Recycle stream flow meters
for monitoring of operating conditions.
- Control Box: NEMA 12X rated control box with ON/OFF switch
and mode indicator lights
- Air Purge: System automatically purges air out of process
pump and membranes before startup
- Inlet Isolation Valve: Provides a convenient shutoff for easy
pre-filter replacement
- Inlet Low Pressure Shutoff Switch: Automatic protection for
the process pump should insufficient feed water
- pressure be available
- Tank Full Pressure Switch: System will automatically start
when tank pressure falls below 30 psi and stop when
- pressure reaches 50 psi
- Simple Maintenance / Inspection: Components are strategically
located on the frame for easy access and inspection
WGR 600, 1200 and 1800 Optional Features:
- Stainless Steel Membrane Housings - replaces standard PVC membrane
housings
- Stainless Steel Process Pump - replaces standard brass process
pump
- Float Switch - mechanical tank full float switch for atmospheric
type storage tanks
- 230V / 1 Ph / 60Hz - optional electrical
- Automatic Flush - allows unit to automatically flush membranes
for 1 minute every two hours of consecutive operation.
- Low Energy Membranes - available on WGR 600, 1200 and 1800
|
